Edge computers based on ARM processor and Linux system are more and more widely used because of their rich functions, high cost performance, good portability and reliability. Especially in the 7X24 hour unattended industrial environment, it is considered a good alternative to industrial computers.

FineTooling Technology provides edge computer customization services based on ARM Cortex-Ax processor and Linux system:

1.     ADC Feature: 12/16/24 bits ADC solutions are available, with the highest configuration accuracy up to ±10 V and 1MSPS sampling rate

2.     Network and Router Function:

l  Optional 4/5 g module and its driver transplant

l  IP/UDP/TCP/RTP/RTCP protocol

l  NAT routing functions

l  Virtual IP

l  WAN firewall, such as traffic statistics and its security access mechanism

l  Optional WIFI module

3.     File Systems Based on eMMC or FLASH: Optimized reliable file driver and read-write algorithm will ensure the designed life of file system as long as a thousand years

4.     Rich Hardware IO Interface Selection:

l  Optional isolated or not the IO interface

l  RS232 and RS422 and RS485 serial bus

l  Optional, IIC, SPI, CAN bus output

l  Optional TFT screen, resistive touch screen (including screen calibration)

5.     uBoot Customization and Optimization

6.     Optional Hardware Watchdog: Automatically brings the system back to normal from an unexpected failure state

7.     Multiple upgrade modes:

l  IAP With SD

l  IAP through Local RS232/USB

l  Remote upgrade by WAN

The Project Mother Board Reference:

For more information please contact: 020-82108945-8002