The FT8206 DAQ belongs to the FT 8000 series multi-channel data acquisition card. The 8000 series belongs to the basic DAQ selection category and is suitable for most industrial applications and audio analysis scenarios. On the basis of FT8205, a protection circuit has been added. FT8206 has an AI SENSE interface. The newly added AI can be configured as a pseudo differential input function. The communication bus is divided into USB, Ethernet, Fidas, and PCIe. The built-in HWSuite toolkit is very convenient for system debugging or experimentation.
Product characteristics:
● 16 channel analog input, 16bit resolution, maximum sampling rate 800KS/s
● Programmable analog input range: ± 10V, ± 5V
● AI can be configured as pseudo differential input
● 2 channel analog output, 16bit resolution, maximum sampling rate of 1.2MS/s
● 24Bits bidirectional digital IO, can be set as input/output according to Bit/Port, 3.3V logic level
● 2-channel timing/counter
● FT Studio, LabVIEW, Visual Studio and other tools for secondary development support
overview：
Overview: FT8206 provides up to 16 channels of single ended analog input, 8 channels of differential analog input, 16Bit sampling rate, maximum 800KS/s, 24 bit DIO, and other functions. Some channels can achieve synchronous sampling, which can meet many common measurement requirements. This equipment is suitable for various industrial applications, such as laboratory automation, research, and design validation. The free Finetooling HWSUIT supporting software provides basic measurement and analysis functions such as SNR, THD, SINAD, etc., while Fang Tong's automated testing platform FT Studio supports all USB DAQ SilverX series data collection cards, making it convenient for users to use quickly.
Application Scenario：
l ATE electronic product functional testing
l Virtual Instrument Laboratory
l Audio and vibration analysis
Analog input characteristics
All measurement results below are measured at room temperature of 25 ℃, unless otherwise specified.
characteristic | parameter |
resolution ratio | 16 bits |
Input Signal 1KHz, DIFF; 800KSPS, 8K Samples: |
SNR ( 20Vpp ) | >92dB |
SINAD ( 2Vpp ) | >93dB |
THD ( 2Vpp ) | <0.002% |
DNL | ±1LSB |
INL | ±1LSB |
synchronous sampling | Some channels can achieve synchronous sampling |
sampling rate |
|
Maximum sampling rate for a single channel | 800KS/s |
Multi channel maximum sampling rate (total) | 800KS/s |
AI0~AI7, AI8~AI15, AI16~AI23 Single channel between groups | 800KS/s/CH（FT8206） |
Minimum sampling rate | No minimum value |
Timing resolution | 50ns |
Input Coupling | DC |
input range | ±10V, ±5V |
Maximum input current | ±10mA |
Impedance |
|
AI+ to AIGND | > 10GΩ | 6.4pF |
AI- to AIGND | > 10GΩ | 6.4pF |
Input Bias Current | ±20pA |
Sample point cache FIFO size | 8192 samples |
Analog output characteristics：
All measurement results below are measured at room temperature of 25 ℃, unless otherwise specified.
characteristic | parameter |
Number of channels | 2-channel, single ended output |
ADC resolution | 16 bits |
SNR(Signal : 20Vpp, 1KHz) | >100dB |
SINAD(Signal : 10Vpp, 1KHz) | >83dB |
THD(Signal : 10Vpp, 1KHz) | <0.008% |
DNL | ±1LSB |
Data update rate | 1.2MS/s/CH |
Timing resolution | 50ns |
Output coupling | DC |
Output range | ±10V |
Output impedance | 0.2Ω |
Input bias current | ±20pA |
AO output data cache | 1024 samples |
Pendulum rate | 20V/uS |
Maximum driving current | 10mA |
Digital IO/PFI：
All measurement results below are measured at room temperature of 25 ℃, unless otherwise specified.
characteristic | parameter |
Number of channels | 24Bits DIO, 2Bits PFI(P0.0/P0.1) |
Reference site | DGND |
Direction control | Each bit can be individually set as input/output |
Input voltage range | 0~3.3V |
Input High Level | 2.2V~3.3V |
Input low level | <0.7V |
Output high level | >3.2V |
Output low level | <0.1V |
Maximum driving current | 4mA |
Initial state of power on | input |
Timer resolution | 20ns |
PFI | Can output square waves with adjustable duty cycle |
Count/Timer：
All measurement results below are measured at room temperature of 25 ℃, unless otherwise specified.
characteristic | parameter |
Number of channels | 2 channels, capable of working simultaneously |
Reference site | DGND |
Count/Timer Bits | 32Bits |
Input voltage range | 0~3.3V |
Input High Level | 2.2V~3.3V |
Input low level | <0.7V |
Counting measurement | edge count |
restart at | Count Up |
Clock accuracy | 10PPM |
Timing clock | 50MHZ |
Timing resolution | 20ns |
If you have more detailed information, please download the product manual
For pre-sales inquiries, please contact: 020-82108945-8002
